Building a Room
Posted: Sat May 30, 2026 3:30 am
Just throwing some progress of the an all purpose room in a metal building. It'll be used as a computer office and a dark room for photography and screen printing.
Bought a nailgun but that sucked for framing so I said screw it. Two screws per stud.
2x10s for the upper loft deck and 23/32 tongue n groove ply.
Built the stairs from five 2x12. It'll hold.
Hired out the drywall. Decent job for a shop office.
Painted with many many coats of PVA sealing white.
Whats left? Outlets, install double door, and paint the corners.
Bought a nailgun but that sucked for framing so I said screw it. Two screws per stud.
2x10s for the upper loft deck and 23/32 tongue n groove ply.
Built the stairs from five 2x12. It'll hold.
Hired out the drywall. Decent job for a shop office.
Painted with many many coats of PVA sealing white.
Whats left? Outlets, install double door, and paint the corners.
- IMG_0001.JPG (2.56 MiB) Viewed 29 times
- IMG_0019.JPG (2.08 MiB) Viewed 29 times
- IMG_0022.JPG (1.9 MiB) Viewed 29 times
- IMG_0023.JPG (2.42 MiB) Viewed 29 times
- IMG_0025.JPG (1.61 MiB) Viewed 29 times
- IMG_0026.JPG (1.74 MiB) Viewed 29 times
- IMG_0027.JPG (1.59 MiB) Viewed 29 times
- IMG_0033.JPG (2.24 MiB) Viewed 29 times
- IMG_0036.JPG (2.32 MiB) Viewed 29 times
- IMG_0037.JPG (2.12 MiB) Viewed 29 times